HDM is now able to reduce the price on all of KONI's 30 Series oval track racing shocks to $103.50ea as shown below. 

The 30 Series Shock is a single adjustable mono-tube design. There are four distinct rebound adjustments that allow you to adjust the shock to suit your needs, chassis setup, and track conditions. It is lightweight, very consistent, and affordable.

The shock you need may vary per chassis. Please email your current shock manufacturer and part number so that we can cross reference those to KONI.

Part Numbering System - i.e.. 30-5325

30 - Series; 5 - Stroke; 3 - Bump Valve; 2 thru 5 is the rebound valve range.

Typical shocks used in dirt oval racing;

** Rayburn Chassis Front: 30-6325  Rear: 30-8325

** Warrior Standard Under Rail Chassis  Front: 30-7514 Rear: 30-9414

** Warrior Dry Slick LF: 30-7514 (3) RF: 30-7325 (5) LR: 30-9325 (2) RR: 30-9325 (5) [number is parenthesis is the rebound setting]

**GRT  LF: 30-7514 RF:30-7647 LR: 30-9436 RR: 30-9436 

5" Shocks

Koni Shock 30-5325 $103.50ea

Koni Shock 30-5436 $103.50ea

6" Shocks

Koni Shock 30-6325 $103.50ea

Koni Shock 30-6436 $103.50ea

7" Shocks

Koni Shock 30-7325 $103.50ea

Koni Shock 30-7436 $103.50ea

Koni Shock 30-7514 $103.50ea

Koni Shock 30-7647 $103.50ea

8" Shocks

Koni Shock 30-8325 $103.50ea

Koni Shock 30-8414 $103.50ea

Koni Shock 30-8436 $103.50ea

Koni Shock 30-8525 $103.50ea

9" Shocks

Koni Shock 30-9325 $103.50ea

Koni Shock 30-9414 $103.50ea

Koni Shock 30-9425 $103.50ea

Koni Shock 30-9436 $103.50ea

Koni Shock 30-9525 $103.50ea

Coil Over Kit

Koni Coil Over Kit  $48.00ea

Don't forget to order your coil over springs.

** this information is given as general specifications. Your chassis manufacturer should be consulted before any purchase. HDM does not and will not specify which shocks you should buy for you setup. 

Copyright © 2003,2004 HDM Performance Parts  All rights reserved. Please review our disclaimer.

As Always, Dealer Inquiries are Encouraged
hdm@hdmworld.com